logo  
 
About | Contact |Postage |Payment Options | Newsletter| Terms and Conditions| Research
 

In The Workshop (Build Logs from MicronWings)
At MicronWings, We've always got a few building projects on the bench.
Follow along with these Build Logs and see some of our products and parts in use.

F22 Micro
A micro F22 built as a test bed to try out a new elevron mixing control system which doesn’t need any control linkages. The end result was simply great with good control and authority over the surfaces.


See build log here
   
Nine Eagles Yak54 - Refitted  
We refitted this Nine Eagles Yak54 777B with an upgraded everything! Basically only the airframe was original. And what aperformer with it's new brushless motor and weight saving electronics.

See build log here
 
This classic design profile sports plane is built from 2mm Depron foam and simply decorated it with a felt pen. I've chosen the 0.8gram BioMetal servos which saves considerably on weight and put this together with a powerful brushless AP-02 motor and micro speed controller. Although not 3D capable, at an all up weight of just 18 grams the performance is really up to the mark for a sports plane.

See build log here
 
FireFly
FireFly This classic design profile sports plane is built from 2mm Depron foam and simply decorated it with a felt pen. I've chosen the 0.8gram BioMetal servos which saves considerably on weight and put this together with a powerful brushless AP-02 motor and micro speed controller. Although not 3D capable, at an all up weight of just 18 grams the performance is really up to the mark for a sports plane.

See build log here
   
Micro PoleCat  
FireFly This is a great example of a sub 20 gram micro plane. We chose the 2gram 7700kv motor and Biometal servos for this build project to keep the weight low.

See build log here
 
DeltaWing V2
FireFly A delta wing with a formed Depron covered airfoil to give very nice slow speed flight.

See build log here

 

This area is under construction - More Build Logs are on their way soon