logo  
 
About | Contact |Postage |Payment Options | Newsletter| Terms and Conditions| Research
 

Adapter JR to JST SH
0101Image01 0202Image02 0303Image03 0404Image04
plantraco nanoact actuator coil




Specifications:

Weight 0.71g each
Length 48mm
Connector 1 JST SH
Connector 2 JR / Futaba
No in pack 4

Adapters for JR / Futaba to JST SH.

This adapter is designed to be used to connect a micro servo to a standard JR / Futaba receiver unit. Please be aware that standard receivers when powered by an ESC with BEC, run at 4.8 volts but some micro servos may not be suitable for this voltage and only run on 1S (3.7volts).

The servos below can be connected to a standard receiver with this adapter. Please see the notes specific to each servo.
Servo Micro Black 2gram With JST SH Connector
Maximum Operating Voltage: 5 volts (use for ESC with BEC power to Rx)
Polarity: Negative and signal wire must be swapped on the servo plug
MicroAces Spares Sub Micro Aileron Servo
Maximum Operating Voltage: 4.2 volts (Use 1S voltage to power Rx)
Polarity: Negative and signal wire must be swapped on the servo plug
Servo Linear Origin Mi-LSM 1300S
Maximum Operating Voltage: 4.2 volts (Use 1S voltage to power Rx)
Polarity: Negative and signal wire must be swapped on the servo plug
Servo Linear Origin Mi-LSM 1800L
Maximum Operating Voltage: 5 volts (use for ESC with BEC power to Rx)
Polarity: Negative and signal wire must be swapped on the servo plug
Servo BlueArrow S02512
Maximum Operating Voltage: 6 volts (use for ESC with BEC power to Rx)
Polarity: Negative and signal wire must be swapped on the servo plug
   




Price: $ 9.90
Now: $7.80
(NEW Lower Price)
(set of 4)

All prices in AUD
MicronWings is an
Australian business




Related Items
Servo Micro 2 gram
MI-LSM 1300S
MI-LSM 1800L
BlueArrow S02512
Extensions 30mm
1 Extensions 60mm
1 Extensions 120mm
1 SH Y-Connector