This adapter can be used to connect servos which have JST SH connectors to a micro receiver which has Molex style plugs to run dual ailerons.

The receivers below can be used with this connector. Please see the notes pertaining to each.
	DelTang Rx34d Molex Pico Blade Polarity: Plug and Play - no wire swapping required. Power Supply: This receiver can operate on 3 - 6 volts. Check that the voltage the receiver is running at and the servo's rated voltage range match.
The servos below can be connected to this Y-Connector. Please see the notes specific to each servo. Servo Micro Black 2gram With JST SH Connector Maximum Operating Voltage: 5 volts (use for ESC with BEC power to Rx) Polarity: Negative and signal wire must be swapped on the servo plug MicroAces Spares Sub Micro Aileron Servo Maximum Operating Voltage: 4.2 volts (Use 1S voltage to power Rx) Polarity: Negative and signal wire must be swapped on the servo plug Servo Linear Origin Mi-LSM 1300S Maximum Operating Voltage: 4.2 volts (Use 1S voltage to power Rx) Polarity: Negative and signal wire must be swapped on the servo plug Servo Linear Origin Mi-LSM 1800L Maximum Operating Voltage: 5 volts (use for ESC with BEC power to Rx) Polarity: Negative and signal wire must be swapped on the servo plug Servo BlueArrow S02512 Maximum Operating Voltage: 6 volts (use for ESC with BEC power to Rx) Polarity: Negative and signal wire must be swapped on the servo plug